Finally, issue the following command in the Terminal depending on what type of flash you wish to perform. If you’re going to attempt this, make sure that the rollback index of the downloaded ROM matches with the rollback index of the MIUI firmware currently installed on your device. Once both these things are done, click ‘flash’ in the Mi Flash Tool to finally install the MIUI Fastboot ROM on your Xiaomi/Redmi/Poco device. ‘clean all and lock’ should be used with precaution. If your device was previously rooted, had a custom ROM, or any other sorts of modifications, then try and not use it.
MIUI ROM comes in two formats – Recovery ROM and Fastboot ROM. According to the information, the recovery ROMs need to be installed via Recovery mode or local storage methods. While the Fastboot ROM could be installed with MiFlash Tool. Now download the ADB drivers and Mi Flash tool on your windows from the above mention links. So every time you want to force update your Xiaomi Redmi Note 4X to the latest available software, you can follow the steps in this brief tutorial. Xiaomi Mi Flash Tool is developed by Xiaomi to flash Stock Firmware (Fastboot ROM) on the Mi and Redmi Phones.
- Most of the these ROM’s available on the web are completely free.
- Now go to the sp flash tool extract folder and launch it.
- Do not hesitate to report any broken links detected.
- Start by clicking ‘Select’ in the tool to launch the file selector window.
- The downloaded file will be a .rar package, so you’ll need to extract its contents.
Start by clicking ‘Select’ in the tool to launch the file selector window. Then navigate to the location where the Fastboot ROM was extracted, select the folder (do not select the ‘images’ folder instead), and click ‘OK’. With everything set up and ready, it’s finally time to flash the Fastboot ROM to your device using the Mi Flash Tool.
Although flashing a Custom ROM is not this link a difficult task, but you need to perform carefully as it might result in a brick. If you’re new to third-party ROM, then do check out the below procedure to flash a Custom ROM on any Android phone using TWRP Recovery. Android Enthusiasts Stack Exchange is a question and answer site for enthusiasts and power users of the Android operating system. If you are in bootloop, press and hold Volume Down + Power button for seconds and you will boot into Fastboot mode. The Fastboot method works even when your device is in bootloop due to some reasons. Turn off your device, then hold Volume Up + Power together to boot into the TWRP recovery. Here’s a small and simple guide to Flash Stock ROM on any Xiaomi device.
- The Xiaomi Redmi Y3 runs on Android 9.0 Pie with MIUI 10 out of the box.
- Once Xiaomi Mi Flash Tool is launched you will be able to see this screen.
- If you have flashed a Global ROM to a previously Chinese ROM Xiaomi phone, or vice versa, relocking the bootloader will result in your phone being bricked.
- Download Xiaomi Firmware Latest Update (Stable Version) and Flash your Xiaomi phones with Firmware (Stock ROM) using official Xiaomi Flash Tool in EDL Mode / Fastboot Mode.
Here you can download all Xiaomi Stock Firmwares absolutely free for all models, you can find your own model on this page. The official Xiaomi update process is much more involved than custom ROMs. It involves downloading the latest version of the Xiaomi firmware, flashing it onto your device, and then using the official Xiaomi update application to install the update. This process is more secure than installing a custom ROM, as it ensures that the update is from the official source and is free from malicious or unwanted code.